C-1. Design for constrained space

Design drive system for the conveyor situated in a narrow passage. L = 120 cm (see the sketch).

Fig.1. Explanation for the task.

Available information:

• One drum to be driven
• No overloads, duty cycle – 100%
• Dusty environment, abundant heat removal capability, wet floor
• Grid 400 V
• Distance between the driven drum of the conveyor and the FC (cable length) – 30 m
• Rated torque 10 kNm
• Speeds: min – 200 rpm, max - 250 rpm
• Cooling water available

Design for: (A) Design system for lowest cost. (B) Design system for highest efficiency

Fig.2. Example of a conveyor with limited space for the gearbox and the motor. (Source)